Пассивный POE инжектор с 8 портами безопасности через Ethernet для IP-сетевых камер Ubiquiti и MikroTik
zhangqing Official Store - Надежность 97.25%
Более 887 подписчиков, дата открытия магазина 23.10.2012
- Положительные оценки: 99% (156)
- Соответствие описанию: 98%
- Отвечает на сообщения: 96%
- Скорость отправки: 96%
Последнее обновление: 28.02.2022
Security 8 port passive POE injector Power over Ethernet
for IP Network Camera
10/100Mbps, Mode B 8 Port Injector without a power supply
Power an IP camera, desktop phone, WiFi access point, or other low voltage devices through a network data cable using this Power over Ethernet (PoE) injector. The PoE Injector takes power from a DC power source (power supply sold separately) and adds it to your Ethernet data cable (Cat5, Cat5e, Cat6) to your device.
Save big on network upgrades and device installations Power over Ethernet delivers power 328 feet from the PoE Injector, eliminating the expense and hassle of installing AC power near your powered device. With this PoE Injector, you can add power to your data cable for a fraction of the cost of upgrading to a PoE capable network switch.
Passive PoE means versatility . A Passive PoE injector always delivers the same voltage as its power source. Pair this injector with a 48 volt DC power supply to power devices labeled “802.3af”, or you can use a 24 volt power supply with 24-volt passive PoE devices like Access Points from Mikrotik, Ubiquiti, and many more.
FEATURES
1. With POE and LAN port 2. With 2.1*5.5mm DC Female dock 3. Pin4/5 positiv, Pin7/8 passive 4. CE/ROSH certificate
5.Use with any ethernet switch 6.Flexible power(DC 12V TO 56V) 7.10/100Mbps fast ethernet 8.Ideal for IP Cameras,VOIP,WiFi 9.8 Port Injector(8 Lan&8 Lan+PoE port)
SPECIFICATIONS
Input 12-56V DC 2.1MM Output 12-56V PER PORT(30W Max) Data 1/2&3/6 Power 4/5 V+ & 7/8 VData In
Connects PC/HUB/Switch Weight 140g Dimensions 175mm×37mm×20mm Ethernet Cable TIA/EIA 568 Cat. 5 Data rate 10/100Mbps Connector RJ-45 Operating Temperature 0°C ~ 40°C Storage Temperature -40°C~+70°C Operating Humidity 10%~80%RH Storage Humidity 5%~90%RH Certification CE , FCC
1.Panel 8 integrating passive POE injector suitable for powering up to eight devices.
2.The RJ45 connectors on one side are connected Ethernet ports with no power (switch)
on the opposite side of the device used to connect power for Ethernet cable.
3.Are used to power the two unused pairs of the Ethernet cable. 4.Power couples: 4,5 (positive pole) / 7,8 (negative pole)
LOW COST SOLUTION FOR PoE
LED INDICATOR
POWER LED
POWER OFF --Off 4/5 (V+),7/8 (V-)--Green 4/5 (V-),7/8 (V+)-- Red
HOW TO INSTALLATION YOUR PoE
step 1 Select switch or injector by number of devices and data rate.
1. The installation site must be away from heat source and electromagnetism interference source,
non-corrosive gas and metal dust. 2. Must not block the cooling hole of the equipment. 3. Installation must be stable fixed placing, not a violent shock. 4. Prevent to crash and conflict with other equipment during the installation, so as not to cause
Local damage of the machine surface.
5. When storing, must be kept in dry warehouse, not exposure to sun and rain.
PRODUCT SHOW
-
certificationCE/ ROHS
-
connectorRJ-45
-
Data Rate10/100 Mbps
-
Date inConnects PC/HUB/Switch
-
Ethernet CableTIA/EIA 568 Cat.5
-
Input12-56V DC 2.1MM
-
Operating Humidity10%~80%RH
-
Operating Temperature0°C~40°C
-
Output12-56V PER PORT(30W Max)
-
PoE MethodMode B: 4/5+7/8-
-
Вес логистики0.300
-
Каждая упаковка1
-
Минимальная единица измерения100000015
-
Название брендаzhangqing
-
Номер моделиZQPOEI008
-
Продано Вsell_by_piece
-
ПроисхождениеКитай
-
Размер логистики - высота (см)8
-
Размер логистики - длина (см)20
-
Размер логистики - ширина (см)7